In our industry, safety comes first. ROX cylinders unmatched safety record is backed by over 12 million cylinders in use by families and businesses
worldwide. For 15 years, our cylinders have been performing in / withstanding diverse weather conditions ranging from - 40 degrees Celsius in arctic regions, to +65 degrees Celsius in tropical, coastal and desert regions. Our cylinders withstand a burst pressure that is twice as high as the traditional steel
cylinders. And, because they will not BLEVE, the risk of
explosion in case of fire is
eliminated.
IT’S LIGHTER
ROX Cylinders lighter weight is one of its most user-friendly attributes, allowing easy
handling. Our cylinders are
typically less than half the weight of their steel equivalents. They are also easier to lift and handle, for just about anyone. Which means less
injury risks as well as increased customer satisfaction.
IT DOESN’T RUST
The cost of refurbishing steel cylinders and its environmental impact are often underestimated. Additionally, refurbishment does not eliminate the risk of rust returning.
ROX cylinders do not rust or deteriorate, which means no more stains in the places on which they are placed.
IT’S TRANSLUCENT
Customers can easily see the gas level and know when it’s time to refill, which means they will be less likely to run out of gas while the cylinder is in use. A simple quick visual check is enough to confirm the level of LPG. We build customer trust and preference with this unique feature.
How to install
It is mandatory to refer to your user manual for further information
How to assemble
Step 1 - Fitting rubber hose
Connect the end of the hose to the regulator outlet (1)
Fasten using hose clips (2)
Do not over-tighten to prevent damaging the hose
Step 2 - Assembling in the Gas Cylinder
Turn the handle clockwise to show the green symbol
Place the Quick On Regulator onto the valve and push down firmly and vertically
You should be able to hear a click sound, meaning it is securely fitted
Step 3 - Operation
Turn the handle anti clockwise to show the red symbol
Your cylinder is ready to use
How to disassemble
Step 1 - End operation
Make sure all your gas consuming appliances are OFF
Turn the handle clockwise to show the green symbol
Step 2 - Unplug
Disassemble by pressing horizontally on the handle; and Pulling upwards at the same time